Clogger Zero Gen2 Women's Chainsaw Trousers – Orange Flash
For women arborists who like a splash of orange, the Clogger Zero Gen2 Women's Chainsaw Trousers – Orange Flash combine lightweight chainsaw protection with cooling ventilation and a fit designed for women.
Four-way stretch fabric and a FlexZone seat seam provide flexibility when climbing and bending. Reinforced high-wear areas add durability, while practical pockets keep essentials accessible when wearing a harness.
Key features
- Cooling comfort: Breathable fabric incorporating NILIT® Breeze yarn, mesh lining and large mesh side vents.
- Freedom to move: Four-way stretch fabric and a FlexZone seat seam.
- Durable construction: High-tenacity nylon ripstop with a water-resistant coating.
- Reinforced wear areas: Abrasion-resistant knee, inner calf and ankle panels, plus Dyneema reinforcement on the right calf.
- Practical storage: Zipped hip and thigh pockets, with lower pockets accessible while wearing a harness.
- Secure fit: Elasticated waistband, boot hooks and belt loops accommodating belts up to 50 mm wide.
- Orange Flash finish: Contrasting orange panels at the front and rear.
- Weight: Just under 1 kg in size Medium.
Chainsaw protection and certification
Clogger’s six-layer Arrestex HP protective fabric provides front protection from waist to ankle, with additional coverage on the left side to accommodate movement.
Certified by Bureau Veritas NZ Ltd to AS/NZS 4453.3:1997, at a test chain speed of 20 m/s.
Fit and sizing
Shaped for women, with an increased rise compared with the men’s fit and a mid-rise waistband that sits at the top of your hips. Extra leg length accommodates harness lift and knee bending while climbing.
Size guide
Start with your hip/seat measurement, taken around the fullest part of your hips and seat. Then check the top-of-hip measurement, where the waistband sits, rather than your natural waist.
| Size | Hip/seat (cm/in) | Top of hip (cm) | Top of hip (in) |
|---|---|---|---|
| 2XS | 89 / 35 | 79–83 | 31–33 |
| XS | 94 / 37 | 84–88 | 33–35 |
| S | 99 / 39 | 89–93 | 35–37 |
| M | 104 / 41 | 94–98 | 37–39 |
| L | 109 / 43 | 99–103 | 39–41 |
| XL | 114 / 45 | 104–108 | 41–43 |
| 2XL | 119 / 47 | 109–113 | 43–45 |
Standard leg length
The measurements below indicate the body inleg each size is designed to fit, rather than the finished trouser length.
| Size | Body inleg (cm) | Body inleg (in) |
|---|---|---|
| 2XS | 72 | 28 |
| XS | 73 | 29 |
| S | 74 | 29 |
| M | 75 | 29.5 |
| L | 76 | 30 |
| XL | 77 | 30 |
| 2XL | 77 | 30 |
These climbing trousers include an additional 6 cm (approximately 2.5 inches) of leg length to accommodate harness lift and knee bending while climbing.
Approximate clothing size equivalents
Use these as a guide only. Body measurements should determine your size.
| Clogger size | AU / NZ / UK | US | EU |
|---|---|---|---|
| 2XS | 8 | 4 | 36 |
| XS | 10 | 6 | 38 |
| S | 12 | 8 | 40 |
| M | 14 | 10 | 42 |
| L | 16 | 12 | 44 |
| XL | 18 | 14 | 46 |
| 2XL | 20 | 16 | 48 |
Need help choosing your size? Contact ArbSupplies on 07 3399 5865 or email sales@arbsupplies.com.au.
Explore the full Clogger range for chainsaw protection and arborist workwear.