Skip to content
Welcome to Australia's Dedicated Arborist tool & Hardware Store
Welcome to Australia's Dedicated Arborist tool & Hardware Store

Clogger Zero Gen2 Men's Chainsaw Trousers โ€“ Orange Flash

by Clogger
SKU TU71Z-O-1
Sale Sale
Original price $540.00
Original price $540.00 - Original price $540.00
Original price $540.00
Current price $429.70
$429.70 - $429.70
Current price $429.70

For arborists who like a splash of orange, the Clogger Zero Gen2 Men's Chainsaw Trousers โ€“ Orange Flash combine lightweight chainsaw protection with cooling ventilation and stretch comfort.

Built for hot conditions, they feature a tough ripstop outer, reinforced high-wear areas and a flexible cut for movement in the canopy and on the ground.

Key features

  • Cooling comfort: Breathable fabric incorporating NILITยฎ Breeze yarn, mesh lining and large mesh side vents.
  • Freedom to move: Four-way stretch fabric and a FlexZone seat seam.
  • Durable construction: High-tenacity nylon ripstop with a water-resistant coating.
  • Reinforced wear areas: Abrasion-resistant knee, inner calf and ankle panels, plus Dyneema reinforcement on the right calf.
  • Practical storage: Zipped hip and thigh pockets, with lower pockets accessible while wearing a harness.
  • Secure fit: Elasticated waistband, boot hooks and belt loops accommodating belts up to 50 mm wide.
  • Orange Flash finish: Contrasting orange panels at the front and rear.
  • Weight: Just under 1 kg in size Medium.

Chainsaw protection and certification

Cloggerโ€™s six-layer Arrestex HP protective fabric provides front chainsaw protection from waist to ankle, with additional coverage on the left side to accommodate movement.

Certified by Bureau Veritas NZ Ltd to AS/NZS 4453.3:1997, at a test chain speed of 20 m/s.

Fit and leg lengths

Slim fit with stretch for climbing and bending. The mid-rise waistband sits at the top of your hips, while extra leg length accommodates harness lift and knee flex.

Short and Tall variants are made to order. Please allow an additional 2 weeks before dispatch.

Size guide

Measure around the top of your hips, where the waistband sits, rather than your natural waist. Use this measurement to select your size; jeans equivalents are approximate.

Size Top of hip (cm) Top of hip (in) Approx. jeans waist (cm/in)
2XS 71โ€“77 28โ€“30 69 / 27
XS 78โ€“83 30.5โ€“32.5 75 / 30
S 84โ€“89 33โ€“35 81 / 32
M 90โ€“95 35.5โ€“37.5 87 / 35
L 96โ€“101 38โ€“40 93 / 37
XL 102โ€“107 40โ€“42 99 / 39
2XL 108โ€“113 43โ€“45 105 / 42
3XL 114โ€“119 45โ€“47 111 / 44

Choose your leg length using your body inleg measurement. The table below shows the person each length is designed to fit, rather than the finished trouser length.

Size Short inleg (cm/in) Standard inleg (cm/in) Tall inleg (cm/in)
2XS 70.5 / 27.5 76.5 / 30 82.5 / 32
XS 72 / 28 78 / 31 84 / 33
S 73.5 / 29 79.5 / 31 85.5 / 33.5
M 74.5 / 29 80.5 / 32 86.5 / 34
L 75.5 / 30 81.5 / 32 87.5 / 34.5
XL 76.5 / 30 82.5 / 32.5 88.5 / 35
2XL 76.5 / 30 82.5 / 32.5 88.5 / 35
3XL 76.5 / 30 82.5 / 32.5 88.5 / 35

All Short, Standard and Tall variants include an additional 6 cm (approximately 2.5 inches) of leg length to accommodate harness lift and knee bending while climbing.

Need help choosing your size? Contact ArbSupplies on 07 3399 5865 or email sales@arbsupplies.com.au.

Explore the full Clogger range for chainsaw protection and arborist workwear.